Superior® Series 2000 Autovalve, 10, 25, 50, & 100 ppd Feed, AV-1
Description
- Automate your chemical gas feed
- Save money on chemicals
- Works in conjunction with your existing gas system
The Superior Autovalve gives water and wastewater treatment facilities an operator-friendly means of controlling the feed rate of chlorine or sulfur dioxide gas when treating varying water flow rates or residuals. Quick response times and a rugged, powerful high-torque DC stepper motor give unsurpassed accuracy and reliability.
The Autovalve is compatible with virtually any existing gas chlorination or sulfur dioxide system. You do not have to be instrument savvy or make any complicated calculations to set up or calibrate the Autovalve. It takes less than 30 minutes to be up and running, using a simple, menu-driven operator interface panel. All you need is a 4-20 mA signal from a water flow meter or residual analyzer, a 110/220 VAC, 50/60 Hz power supply, and a gas chlorinator or sulfonator. The user-friendly menu system guides you through calibration, although most installations will only require a minimum initial check to set maximum gas feed rates. The Superior Autovalve is the only automatic gas control valve that has all three control modes (flow, residual or valve position) already built into the controller. There is no need to buy or install extra modules or chips.
Includes: control valve and feed rate valve.
Product Information
- Item number
- 68633
- Brand Name
- Chemical Injection Technologies - Superior
- Catalog Page
- 190
- Net weight
- 22.8
- Condition
- New
Superior® Series 2000 Autovalve, 10, 25, 50, & 100 ppd Feed, AV-1
- Item number
- 68633
- Brand Name
- Chemical Injection Technologies - Superior
- Catalog Page
- 190
- Net weight
- 22.8
- Condition
- New
- Automate your chemical gas feed
- Save money on chemicals
- Works in conjunction with your existing gas system
The Superior Autovalve gives water and wastewater treatment facilities an operator-friendly means of controlling the feed rate of chlorine or sulfur dioxide gas when treating varying water flow rates or residuals. Quick response times and a rugged, powerful high-torque DC stepper motor give unsurpassed accuracy and reliability.
The Autovalve is compatible with virtually any existing gas chlorination or sulfur dioxide system. You do not have to be instrument savvy or make any complicated calculations to set up or calibrate the Autovalve. It takes less than 30 minutes to be up and running, using a simple, menu-driven operator interface panel. All you need is a 4-20 mA signal from a water flow meter or residual analyzer, a 110/220 VAC, 50/60 Hz power supply, and a gas chlorinator or sulfonator. The user-friendly menu system guides you through calibration, although most installations will only require a minimum initial check to set maximum gas feed rates. The Superior Autovalve is the only automatic gas control valve that has all three control modes (flow, residual or valve position) already built into the controller. There is no need to buy or install extra modules or chips.
Includes: control valve and feed rate valve.