PULSAtron® Series HV Pump, 240 GPD, 80 PSI, LVH7SA-WTSK
Description
- Easy setup
These Pulsafeeder Series HV pumps are set up with wet end materials that are ideal for higher viscosity chemicals. All Series HV pumps are UL listed for indoor and outdoor use. The rugged housing protects the electronics to ensure the long life of the pump.
Manual control pumps feature a knob you turn for both speed rate (strokes per minute) and stroke length in order to vary pump output.
Note: Due to the high viscosity of flocculants, foot valves/strainers are not recommended for use with these pumps and are not included with the pumps. We recommend flooded-suction setup for high-viscosity pumps.
Use with aluminum sulfate (alum) and polymer (call for compatibility with other chemicals). Wetted materials: PVC head, PVC fittings, 316 SS check balls, PTFE diaphragm and PTFE seats/O-rings.
Pumps include: injection check valve assembly, suction valve, discharge valve, 4' PVC suction tubing and 8' polyethylene discharge tubing.
- GPD: 240
- PSI: 80
- Connection: 3/4"OD Tube
- Maximum Viscosity: 20,000 cP
- Power: 115 VAC
Product Information
- Item number
- 43593
- Brand Name
- Pulsafeeder
- Catalog Page
- 115
- Net weight
- 25
- Condition
- New
Accessories
PULSAtron® Series HV Pump, 240 GPD, 80 PSI, LVH7SA-WTSK
- Item number
- 43593
- Brand Name
- Pulsafeeder
- Catalog Page
- 115
- Net weight
- 25
- Condition
- New
- Easy setup
These Pulsafeeder Series HV pumps are set up with wet end materials that are ideal for higher viscosity chemicals. All Series HV pumps are UL listed for indoor and outdoor use. The rugged housing protects the electronics to ensure the long life of the pump.
Manual control pumps feature a knob you turn for both speed rate (strokes per minute) and stroke length in order to vary pump output.
Note: Due to the high viscosity of flocculants, foot valves/strainers are not recommended for use with these pumps and are not included with the pumps. We recommend flooded-suction setup for high-viscosity pumps.
Use with aluminum sulfate (alum) and polymer (call for compatibility with other chemicals). Wetted materials: PVC head, PVC fittings, 316 SS check balls, PTFE diaphragm and PTFE seats/O-rings.
Pumps include: injection check valve assembly, suction valve, discharge valve, 4' PVC suction tubing and 8' polyethylene discharge tubing.
- GPD: 240
- PSI: 80
- Connection: 3/4"OD Tube
- Maximum Viscosity: 20,000 cP
- Power: 115 VAC