PULSAtron® Series HV Pulse Control Pump, 24 GPD, 150 PSI, LVF4EA-VTT5-XXX
Description
- Easy setup
- HV pumps handle up to 20,000 cPS—ideal for high viscosity chemicals
These Pulsafeeder Series HV pumps are set up with wet end materials that are ideal for higher viscosity chemicals. All Series HV pumps are UL listed for indoor and outdoor use. The rugged housing protects the electronics to ensure the long life of the pump.
Pulse control accept digital pulse and analog 4-20 mA signals respectively for pacing pump speed rate.
Note: Due to the high viscosity of flocculants, foot valves/strainers are not recommended for use with these pumps and are not included with the pumps. We recommend flooded-suction setup for high-viscosity pumps.
Use with aluminum sulfate (alum) and polymer (call for compatibility with other chemicals). Wetted materials: PVC head, PVC fittings, PTFE check balls, PTFE diaphragm and PTFE seats/O-rings.
Pumps include: injection check valve assembly, suction valve, discharge valve, 4' PVC suction tubing, 8' polyethylene discharge tubing and control cables.
- GPD: 24
- PSI: 150
- Connection: 1/2"OD Tube (Pump uses 3/4" OD tubing on suction side)
- Maximum Viscosity: 20,000 cP
- Power: 115 VAC
- Turndown ratio: 100:1
- Accuracy: ±2%
Product Information
- Item number
- 351400
- Brand Name
- Pulsafeeder
- Catalog Page
- 115
- Net weight
- 19
- Condition
- New
Accessories
PULSAtron® Series HV Pulse Control Pump, 24 GPD, 150 PSI, LVF4EA-VTT5-XXX
- Item number
- 351400
- Brand Name
- Pulsafeeder
- Catalog Page
- 115
- Net weight
- 19
- Condition
- New
- Easy setup
- HV pumps handle up to 20,000 cPS—ideal for high viscosity chemicals
These Pulsafeeder Series HV pumps are set up with wet end materials that are ideal for higher viscosity chemicals. All Series HV pumps are UL listed for indoor and outdoor use. The rugged housing protects the electronics to ensure the long life of the pump.
Pulse control accept digital pulse and analog 4-20 mA signals respectively for pacing pump speed rate.
Note: Due to the high viscosity of flocculants, foot valves/strainers are not recommended for use with these pumps and are not included with the pumps. We recommend flooded-suction setup for high-viscosity pumps.
Use with aluminum sulfate (alum) and polymer (call for compatibility with other chemicals). Wetted materials: PVC head, PVC fittings, PTFE check balls, PTFE diaphragm and PTFE seats/O-rings.
Pumps include: injection check valve assembly, suction valve, discharge valve, 4' PVC suction tubing, 8' polyethylene discharge tubing and control cables.
- GPD: 24
- PSI: 150
- Connection: 1/2"OD Tube (Pump uses 3/4" OD tubing on suction side)
- Maximum Viscosity: 20,000 cP
- Power: 115 VAC
- Turndown ratio: 100:1
- Accuracy: ±2%