PULSAtron® Series E Plus Pump w/ Pulse Input, 24 GPD, 100 PSI, LPB4EA-KTT1-XXX
Description
- Excellent at low and high flows
- Tested and certified by WQA against NSF/ANSI 61 and 372
Pulsafeeder's Series E Plus pumps offer easy setup and have excellent priming characteristics. All Series E Plus pumps come standard with an on/off switch and manual speed and stroke controls. The sealed housing protects electronics from outside elements.
Pumps with standard head feature a manual bleed valve to prevent loss of prime due to off-gassing.
Pumps for Fluoride with Standard Head: Use with 20% hydrofluosilicic acid. Call for compatibility with other chemicals. Wetted materials: PVDF head and fittings, PTFE check balls, PTFE diaphragm and PTFE seats/O-rings.
Pumps include: injection check valve assembly, foot valve/strainer, suction valve, discharge valve, 4 feet of PVC suction tubing, 4 feet of bleed valve return tubing and 8 feet of PE discharge tubing. Standard head models also include: bleed valve.
- Connection: 3/8" OD Tube
- Maximum Viscosity: 1000 cP
- Suction Lift: 4 ft
Product Information
- Item number
- 351364
- Brand Name
- Pulsafeeder
- Catalog Page
- 113
- Net weight
- 10.8
- Condition
- New
Accessories
PULSAtron® Series E Plus Pump w/ Pulse Input, 24 GPD, 100 PSI, LPB4EA-KTT1-XXX
- Item number
- 351364
- Brand Name
- Pulsafeeder
- Catalog Page
- 113
- Net weight
- 10.8
- Condition
- New
- Excellent at low and high flows
- Tested and certified by WQA against NSF/ANSI 61 and 372
Pulsafeeder's Series E Plus pumps offer easy setup and have excellent priming characteristics. All Series E Plus pumps come standard with an on/off switch and manual speed and stroke controls. The sealed housing protects electronics from outside elements.
Pumps with standard head feature a manual bleed valve to prevent loss of prime due to off-gassing.
Pumps for Fluoride with Standard Head: Use with 20% hydrofluosilicic acid. Call for compatibility with other chemicals. Wetted materials: PVDF head and fittings, PTFE check balls, PTFE diaphragm and PTFE seats/O-rings.
Pumps include: injection check valve assembly, foot valve/strainer, suction valve, discharge valve, 4 feet of PVC suction tubing, 4 feet of bleed valve return tubing and 8 feet of PE discharge tubing. Standard head models also include: bleed valve.
- Connection: 3/8" OD Tube
- Maximum Viscosity: 1000 cP
- Suction Lift: 4 ft