RKI Beacon™ 410A Fixed Gas 4-Channel Controller, 115/220 VAC
Description
- Accepts any 4-20 mA transmitter input (24 VDC)
The RKI Beacon 410A system lets you configure the ideal fixed gas detection setup for your application—simply combine a controller with your choice of sensors and transmitters. Easy to install and operate, microprocessor-based Beacon controllers monitor gases using any combination of direct-connect sensors or sensor/transmitters (sold separately).
The Beacon 410A controller monitors four channels at once. Each channel features three alarm points and two dedicated relays—all fully configurable—as well as a bank of common relays. A 4-20 mA transmitter outputs signals to external devices. Easy-to-use menus on the OLED display allow for easy setup.
When in use, the display simultaneously shows gas type, readings and status for all four channels. A min-max feature retains high and low peak readings for review at any time, while a digital Modbus interface facilitates remote datalogging. Alarms and Form-C relay contacts are built in, so there's no need to purchase or maintain add-on cards or components. An exterior reset switch allows you to silence the integral alarm without opening the housing.
- Alarms: audible (94 dB) and visual (4 LEDs per channel)
- Controller inputs: direct-wired sensors; 4-20 mA (24 VDC, 2 or 3 wire)
- Controller relay outputs: 2 programmable Form-C relays per channel, 5 common relays, 4-20 mA signal (max 500 O impedance per channel), and Modbus RS-485
- Display: backlit alphanumeric LCD
- Power: 115/220 VAC or 24 VDC
- Enclosure: NEMA 4X
- Operating conditions: -4 to 122°F
- Dimensions (W x D x H): 11.5" x 6.4" x 12.5"
Product Information
- Item number
- 332615
- Brand Name
- RKI Instruments Inc
- Catalog Page
- 1320
- Net weight
- 10.6
- Condition
- New
RKI Beacon™ 410A Fixed Gas 4-Channel Controller, 115/220 VAC
- Item number
- 332615
- Brand Name
- RKI Instruments Inc
- Catalog Page
- 1320
- Net weight
- 10.6
- Condition
- New
- Accepts any 4-20 mA transmitter input (24 VDC)
The RKI Beacon 410A system lets you configure the ideal fixed gas detection setup for your application—simply combine a controller with your choice of sensors and transmitters. Easy to install and operate, microprocessor-based Beacon controllers monitor gases using any combination of direct-connect sensors or sensor/transmitters (sold separately).
The Beacon 410A controller monitors four channels at once. Each channel features three alarm points and two dedicated relays—all fully configurable—as well as a bank of common relays. A 4-20 mA transmitter outputs signals to external devices. Easy-to-use menus on the OLED display allow for easy setup.
When in use, the display simultaneously shows gas type, readings and status for all four channels. A min-max feature retains high and low peak readings for review at any time, while a digital Modbus interface facilitates remote datalogging. Alarms and Form-C relay contacts are built in, so there's no need to purchase or maintain add-on cards or components. An exterior reset switch allows you to silence the integral alarm without opening the housing.
- Alarms: audible (94 dB) and visual (4 LEDs per channel)
- Controller inputs: direct-wired sensors; 4-20 mA (24 VDC, 2 or 3 wire)
- Controller relay outputs: 2 programmable Form-C relays per channel, 5 common relays, 4-20 mA signal (max 500 O impedance per channel), and Modbus RS-485
- Display: backlit alphanumeric LCD
- Power: 115/220 VAC or 24 VDC
- Enclosure: NEMA 4X
- Operating conditions: -4 to 122°F
- Dimensions (W x D x H): 11.5" x 6.4" x 12.5"