RKI Beacon™ 200 Fixed Gas 2-Channel Controller, 115/220 VAC
Description
- Accepts any 4-20 mA transmitter input (24 VDC)
The RKI Beacon 200 system lets you configure the ideal fixed gas detection setup for your application—simply combine a controller with your choice of sensors and transmitters. Easy to install and operate, microprocessor-based Beacon controllers monitor gases using any combination of direct-connect sensors or sensor/transmitters (sold separately).
The Beacon 200 controller is a powerful, low-cost fixed-system controller for two points of gas detection. It features 10-amp relays, which are strong enough to actuate most external alarms and horns without using subordinate relays. The backlit digital display shows gas type and concentration simultaneously. A wall mounting kit (included) makes installation easy.
Controller features built-in audible and visual alarms, as well as a 4-20 mA transmitter to output signals to external devices. An exterior reset switch allows you to silence the integral alarm without opening the housing.
Includes: wall mounting kit.
- Alarms: audible (94 dB) and visual (4 LEDs per channel)
- Controller inputs: direct-wired sensors; 4-20 mA (24 VDC, 2 or 3 wire)
- Controller relay outputs: 7 relays and 4-20 mA (max 1000 O impedance per channel)
- Display: backlit alphanumeric LCD
- Power: 115/220 VAC or 24 VDC
- Enclosure: NEMA 4X
- Operating conditions: -4 to 122°F
- Dimensions (W x D x H): 8.5" x 6.3" x 10.5"
Product Information
- Item number
- 332613
- Brand Name
- RKI Instruments Inc
- Catalog Page
- 1320
- Net weight
- 10
- Condition
- New
RKI Beacon™ 200 Fixed Gas 2-Channel Controller, 115/220 VAC
- Item number
- 332613
- Brand Name
- RKI Instruments Inc
- Catalog Page
- 1320
- Net weight
- 10
- Condition
- New
- Accepts any 4-20 mA transmitter input (24 VDC)
The RKI Beacon 200 system lets you configure the ideal fixed gas detection setup for your application—simply combine a controller with your choice of sensors and transmitters. Easy to install and operate, microprocessor-based Beacon controllers monitor gases using any combination of direct-connect sensors or sensor/transmitters (sold separately).
The Beacon 200 controller is a powerful, low-cost fixed-system controller for two points of gas detection. It features 10-amp relays, which are strong enough to actuate most external alarms and horns without using subordinate relays. The backlit digital display shows gas type and concentration simultaneously. A wall mounting kit (included) makes installation easy.
Controller features built-in audible and visual alarms, as well as a 4-20 mA transmitter to output signals to external devices. An exterior reset switch allows you to silence the integral alarm without opening the housing.
Includes: wall mounting kit.
- Alarms: audible (94 dB) and visual (4 LEDs per channel)
- Controller inputs: direct-wired sensors; 4-20 mA (24 VDC, 2 or 3 wire)
- Controller relay outputs: 7 relays and 4-20 mA (max 1000 O impedance per channel)
- Display: backlit alphanumeric LCD
- Power: 115/220 VAC or 24 VDC
- Enclosure: NEMA 4X
- Operating conditions: -4 to 122°F
- Dimensions (W x D x H): 8.5" x 6.3" x 10.5"