PlantPRO™ EZBlend Polymer Feed System
Description
- Efficient wall-mount design saves space
- Simple plug-and-play setup
- Works with any polymer-compatible pump up to 16 gph
Rely on the EZBlend system for a basic and simple way to feed polymer. It includes all the components you need for easy setup—while giving you the freedom to select your preferred pump. All PVC construction offers strength and chemical resistance.
To set up your EZBlend system, simply mount the panel to the wall (typically above your polymer tank), secure your pump to the pump shelf, connect polymer and water supplies to the provided inlets, and start the flow. While operating, a 2 to 20 gpm rotameter measures dilution water while a globe valve controls it. Primary polymer mixing happens at the injection point in a clear hydrokinetic tee. Secondary mixing occurs while traveling through a six-element static mixer.
System also features a calibration column, diaphragm-sealed pressure gauge, and isolation and check valves.
Note: Polymer pump not included. Either order separately or use a pump you already own.
- Dilution water inlet: 1" NPT(F)
- Polymer inlet (neat): 1/2" NPT(F)
- Solution outlet: 1" NPT(F)
- Dilution water flow: 2 to 20 gpm, 35 psi minimum required
- Polymer output: depends on pump selected, up to 16 gph
Product Information
- Item number
- 350799
- Brand Name
- PlantPRO
- Catalog Page
- 177
- Net weight
- 80
- Condition
- New
PlantPRO™ EZBlend Polymer Feed System
- Item number
- 350799
- Brand Name
- PlantPRO
- Catalog Page
- 177
- Net weight
- 80
- Condition
- New
- Efficient wall-mount design saves space
- Simple plug-and-play setup
- Works with any polymer-compatible pump up to 16 gph
Rely on the EZBlend system for a basic and simple way to feed polymer. It includes all the components you need for easy setup—while giving you the freedom to select your preferred pump. All PVC construction offers strength and chemical resistance.
To set up your EZBlend system, simply mount the panel to the wall (typically above your polymer tank), secure your pump to the pump shelf, connect polymer and water supplies to the provided inlets, and start the flow. While operating, a 2 to 20 gpm rotameter measures dilution water while a globe valve controls it. Primary polymer mixing happens at the injection point in a clear hydrokinetic tee. Secondary mixing occurs while traveling through a six-element static mixer.
System also features a calibration column, diaphragm-sealed pressure gauge, and isolation and check valves.
Note: Polymer pump not included. Either order separately or use a pump you already own.
- Dilution water inlet: 1" NPT(F)
- Polymer inlet (neat): 1/2" NPT(F)
- Solution outlet: 1" NPT(F)
- Dilution water flow: 2 to 20 gpm, 35 psi minimum required
- Polymer output: depends on pump selected, up to 16 gph