Labconco WaterPro® BT Water Purification System with Remote Dispensing, 9015220
Description
- From your tap to Type I or RO water
- Fits neatly on a lab bench or mounts on a wall
- Visual alarms alert you when maintenance is needed
Turn almost any lab sink into an on-demand ultrapurified water station with these purification systems. For less critical lab applications such as glassware rinsing, the system produces RO-purified water and stores it in a built-in 6-L tank. RO water purity is maintained by recirculating the water in the tank through the pretreatment/reverse osmosis cartridge for three minutes every two hours. Access RO water from the tank outlet valve on the back of the unit.
To make ultrapure 18.2-mΩ Type I water, this system passes the RO water through a deionization cartridge. The optional 0.22 µm final filter (stock # 87928) ensures bacteria and particles over 0.22 µm diameter are removed. Easily access Type I water from the front dispenser.
The color LCD shows operating modes, operating parameters, maintenance or alarm messages and tank level. The control panel lets you quickly set alarm points, volume dispensed and dispensing time for automatic dispensing, flow rate calibration and tank level calibration. Multiple alarms help you easily maintain the unit and the quality of dispensed water.
Remote dispensing model let you dispense water up to 6.5 feet away from the WaterPro BT unit.
Includes: 10-ft clear tubing and a 3/8" ID hose barb for the Type I dispensing valve; 8 x 8 mm elbow connector and 3 ft of 8-mm tubing with ball valve for the tank outlet; sanitation kit; and two 1-micron air vent filters. 12 month warranty.
Note: Filter pack (stock # 87926) is required; order separately.
- Feedwater requirements: potable, 4 to 10 pH, 5 to 35°C, free chlorine <1mg/L, TOC < 2000 ppb
- Output rate
Type I: >0.5 L/min
RO Water: 3 L/hour - Output water quality
Type I: 18.2 MΩ/cm, <10 ppb TOC
RO Water: 94% conductivity removal from feed water - Inlet pressure (min/max): 7.3 to 87.0 psi
- Dimensions: 14"W x 25"H x 8"D
Product Information
- Item number
- 87925
- Brand Name
- Labconco
- Catalog Page
- 653
- Net weight
- 35
- Condition
- New
Labconco WaterPro® BT Water Purification System with Remote Dispensing, 9015220
- Item number
- 87925
- Brand Name
- Labconco
- Catalog Page
- 653
- Net weight
- 35
- Condition
- New
- From your tap to Type I or RO water
- Fits neatly on a lab bench or mounts on a wall
- Visual alarms alert you when maintenance is needed
Turn almost any lab sink into an on-demand ultrapurified water station with these purification systems. For less critical lab applications such as glassware rinsing, the system produces RO-purified water and stores it in a built-in 6-L tank. RO water purity is maintained by recirculating the water in the tank through the pretreatment/reverse osmosis cartridge for three minutes every two hours. Access RO water from the tank outlet valve on the back of the unit.
To make ultrapure 18.2-mΩ Type I water, this system passes the RO water through a deionization cartridge. The optional 0.22 µm final filter (stock # 87928) ensures bacteria and particles over 0.22 µm diameter are removed. Easily access Type I water from the front dispenser.
The color LCD shows operating modes, operating parameters, maintenance or alarm messages and tank level. The control panel lets you quickly set alarm points, volume dispensed and dispensing time for automatic dispensing, flow rate calibration and tank level calibration. Multiple alarms help you easily maintain the unit and the quality of dispensed water.
Remote dispensing model let you dispense water up to 6.5 feet away from the WaterPro BT unit.
Includes: 10-ft clear tubing and a 3/8" ID hose barb for the Type I dispensing valve; 8 x 8 mm elbow connector and 3 ft of 8-mm tubing with ball valve for the tank outlet; sanitation kit; and two 1-micron air vent filters. 12 month warranty.
Note: Filter pack (stock # 87926) is required; order separately.
- Feedwater requirements: potable, 4 to 10 pH, 5 to 35°C, free chlorine <1mg/L, TOC < 2000 ppb
- Output rate
Type I: >0.5 L/min
RO Water: 3 L/hour - Output water quality
Type I: 18.2 MΩ/cm, <10 ppb TOC
RO Water: 94% conductivity removal from feed water - Inlet pressure (min/max): 7.3 to 87.0 psi
- Dimensions: 14"W x 25"H x 8"D