The Honeywell Analytics Touchpoint Plus gas detector system is an easy-to-configure, wall-mounted control system. Intuitive user interface and modular approach let you control and configure settings for a wide range of applications. Use it with your choice of several Sensepoint gas detectors to monitor hazardous gases in critical locations. If you need to integrate your gas detection with a higher-level management system, the Modbus output option makes this straightforward.

The user-friendly Touchpoint Plus controller offers intuitive touchscreen menus that let you quickly configure, operate and maintain the gas detection system. Real-time data is presented in a easy to navigate menu. Traffic-light style status indicators let operators instantly see system status from a distance to easily make time-critical decisions. Cal mode offers push-button zero/span calibration, and Authorization mode lets you lock critical configuration settings. Multilingual interface simplifies operation for any user.

The Touchpoint Plus is an advanced four-channel controller. Advanced controllers have Modbus output to integrate to your computers or SCADA system, and a backup battery in case of power failures. The unit's NEMA 4X polycarbonate enclosure is UL/CSA approved for Class I, Division 2, Group A, B C and D or non-hazardous only. All cable entries are made at the bottom of the box in the predefined knockouts.

• Output relays: 12 relay outputs, NO/C/NC changeover; 1.7A @ 30VDC/250VAC; user configurable-energised/de-energised, latching/non latching, time delay
• Display: 7" color LCD touchscreen, graphic user interface
• Power: 110/220 VAC, 50-60 Hz manual switching
• Operating conditions: 14 to 131°F continuous, up to 95% RH (non-condensing)
• Dimensions: 16.8"W x 11.8"H x 6.1"D