Honeywell Analytics Sensepoint Gas Detector, Cl2, 0-5 ppm
Description
The Honeywell Analytics Touchpoint Plus gas detector system is an easy-to-configure, wall-mounted control system. Intuitive user interface and modular approach let you control and configure settings for a wide range of applications. Use it with your choice of several Sensepoint gas detectors to monitor hazardous gases in critical locations. If you need to integrate your gas detection with a higher-level management system, the Modbus output option makes this straightforward.
Sensepoint detectors are easy to use—they are supplied preset from the factory, and there are no user-serviceable parts. All detector adjustments are made at the Touchpoint Plus controller. At the end of the sensor's operating life, simply unscrew the sensor and replace it with a new one before reconfiguring the controller.
Detectors feature two programmable alarm relays, one programmable fault relay, an industry-standard 4-20 mA output (sink or source selectable) and Modbus. Installation is simple using the prewired junction box, conduit or armored cable, and glands. Threaded M20, 3/4 and 1/2" NPT clearance entries are included on each box, so you can select the most convenient entry to use.
- Measuring Range: 0-5 ppm
- Operating Conditions: 14 to 131°F up to 95% RH (non-condensing)
- Audible alarm: 70dB at 1 meter
- Power: 10 to 28 VDC, 2-wire loop power
- Dimensions: 6.1"W x 8"H x 3"D
Product Information
- Item number
- 71450
- Brand Name
- Honeywell Analytics Dist. Inc.
- Catalog Page
- 1319
- Net weight
- 2.4
- Condition
- New
Honeywell Analytics Sensepoint Gas Detector, Cl2, 0-5 ppm
- Item number
- 71450
- Brand Name
- Honeywell Analytics Dist. Inc.
- Catalog Page
- 1319
- Net weight
- 2.4
- Condition
- New
The Honeywell Analytics Touchpoint Plus gas detector system is an easy-to-configure, wall-mounted control system. Intuitive user interface and modular approach let you control and configure settings for a wide range of applications. Use it with your choice of several Sensepoint gas detectors to monitor hazardous gases in critical locations. If you need to integrate your gas detection with a higher-level management system, the Modbus output option makes this straightforward.
Sensepoint detectors are easy to use—they are supplied preset from the factory, and there are no user-serviceable parts. All detector adjustments are made at the Touchpoint Plus controller. At the end of the sensor's operating life, simply unscrew the sensor and replace it with a new one before reconfiguring the controller.
Detectors feature two programmable alarm relays, one programmable fault relay, an industry-standard 4-20 mA output (sink or source selectable) and Modbus. Installation is simple using the prewired junction box, conduit or armored cable, and glands. Threaded M20, 3/4 and 1/2" NPT clearance entries are included on each box, so you can select the most convenient entry to use.
- Measuring Range: 0-5 ppm
- Operating Conditions: 14 to 131°F up to 95% RH (non-condensing)
- Audible alarm: 70dB at 1 meter
- Power: 10 to 28 VDC, 2-wire loop power
- Dimensions: 6.1"W x 8"H x 3"D