SJE Pumpmaster Pump Switch, NC 30' Cord (3/4HP-120V 2HP-230V)
Description
These mechanically activated, wide-angle pump switches are suitable for use in non-potable water and sewage applications. They are not sensitive to rotation or turbulence, allowing them to be used in both calm and turbulent applications.
The heavy-duty contacts are rated up to 13 amps for direct control of pumps up to 1/2 hp @ 120 VAC and 1 hp @ 230 VAC. The contacts are mechanically actuated and contain no mercury. These durable floats are made of high-impact, corrosion-resistant PVC for use in water temperatures up to 140°F.
Select float switches with Normally Open (NO) contacts for pump-down or high level alarms, and Normally Closed (NC) contact for pump up or low level alarms. "Normal" is the state of the contacts when the float is hanging straight down. All switches are equipped with a 115V piggyback plug for direct pump operation, which may be removed for direct wiring into a panel box.
Note: These float switches may be used for direct operation of single-phase pumps up to the contact load capacity. Check with local electrical codes before using on 230V applications.
Note: Removing piggy-back plug negates UL/CSA approval.
- Description: 15 Amp Max. 3/4 HP @ 120 VAC/2 HP @ 230 VAC
- Type: pump/load duty, wide angle
- Range: 7 to 36 inches, adjustable via tethered length
- Electrical rating: 15A run, 85A start, 3/4 hp max @ 120 VAC 1-phase/2HP @ 240 VAC
- Switch element: SPDT mechanical, snap action
- Float material: PVC
- Cable: flexible 16-gauge, 3-conductor (UL) SJOW, water-resistant (CPE)
- Operating conditions: 140°F max
- Max operating depth: 30 feet
- Dimensions: 3.05"Dia x 3.56"L
Product Information
- Item number
- 29253
- Brand Name
- SJE Rhombus
- Net weight
- 3.8
- Condition
- New
SJE Pumpmaster Pump Switch, NC 30' Cord (3/4HP-120V 2HP-230V)
- Item number
- 29253
- Brand Name
- SJE Rhombus
- Net weight
- 3.8
- Condition
- New
These mechanically activated, wide-angle pump switches are suitable for use in non-potable water and sewage applications. They are not sensitive to rotation or turbulence, allowing them to be used in both calm and turbulent applications.
The heavy-duty contacts are rated up to 13 amps for direct control of pumps up to 1/2 hp @ 120 VAC and 1 hp @ 230 VAC. The contacts are mechanically actuated and contain no mercury. These durable floats are made of high-impact, corrosion-resistant PVC for use in water temperatures up to 140°F.
Select float switches with Normally Open (NO) contacts for pump-down or high level alarms, and Normally Closed (NC) contact for pump up or low level alarms. "Normal" is the state of the contacts when the float is hanging straight down. All switches are equipped with a 115V piggyback plug for direct pump operation, which may be removed for direct wiring into a panel box.
Note: These float switches may be used for direct operation of single-phase pumps up to the contact load capacity. Check with local electrical codes before using on 230V applications.
Note: Removing piggy-back plug negates UL/CSA approval.
- Description: 15 Amp Max. 3/4 HP @ 120 VAC/2 HP @ 230 VAC
- Type: pump/load duty, wide angle
- Range: 7 to 36 inches, adjustable via tethered length
- Electrical rating: 15A run, 85A start, 3/4 hp max @ 120 VAC 1-phase/2HP @ 240 VAC
- Switch element: SPDT mechanical, snap action
- Float material: PVC
- Cable: flexible 16-gauge, 3-conductor (UL) SJOW, water-resistant (CPE)
- Operating conditions: 140°F max
- Max operating depth: 30 feet
- Dimensions: 3.05"Dia x 3.56"L