Walchem Posiflow Sensor For VE Liquid Ends
Description
- Works with all Walchem E-series chemical feed pumps
The Posiflow sensor verifies that your metering pump is truly moving liquid and has not lost prime. It uses proprietary circuitry and advanced sensor technology to detect liquid flow output. There are no moving parts, so it does not obstruct the flow path.
Wire the sensor to an alarm panel or autodialer for notification of a no-flow condition. It mounts directly into the manual air vent valve or multi-function valve on all E-series pumps. If your Walchem pump is fitted with either a VCC or VCA liquid end, use a Posiflow in-line adapter downstream of the discharge of the pump.
The Posiflow sensor requires a minimum of 30 psi backpressure from the process in order to operate properly. In applications where the chemical is pumping into a system with less than 30 psi, use the high- pressure spring to replace the spring in the pump's 3/8" injection valve.
Note: This sensor is compatible only with Walchem pumps.
Product Information
- Item number
- 61246
- Brand Name
- Walchem
- Net weight
- 0.4
- Condition
- New
Walchem Posiflow Sensor For VE Liquid Ends
- Item number
- 61246
- Brand Name
- Walchem
- Net weight
- 0.4
- Condition
- New
- Works with all Walchem E-series chemical feed pumps
The Posiflow sensor verifies that your metering pump is truly moving liquid and has not lost prime. It uses proprietary circuitry and advanced sensor technology to detect liquid flow output. There are no moving parts, so it does not obstruct the flow path.
Wire the sensor to an alarm panel or autodialer for notification of a no-flow condition. It mounts directly into the manual air vent valve or multi-function valve on all E-series pumps. If your Walchem pump is fitted with either a VCC or VCA liquid end, use a Posiflow in-line adapter downstream of the discharge of the pump.
The Posiflow sensor requires a minimum of 30 psi backpressure from the process in order to operate properly. In applications where the chemical is pumping into a system with less than 30 psi, use the high- pressure spring to replace the spring in the pump's 3/8" injection valve.
Note: This sensor is compatible only with Walchem pumps.