Aquarian™ Professional Aerator, 0.5 hp/115V/1 PH, 100'L Power Cable
Description
- Standard Franklin 1- and 3-phase motors up to 3 hp
- Suitable for fresh water and saltwater applications
- Control boxes included
These aerators incorporate a 3450 rpm Franklin submersible motor that is water-cooled, water-lubricated and UL & CSA recognized. There are no seals or bearings to maintain. A foul-resistant propeller pumps the large water column to a computer-designed diffuser where a shearing effect occurs, breaking the column into micro droplets. This increases surface area exposed to atmosphere, maximizing oxygen exposure.
Aerators consist of a 36" square polyethylene-molded and polystyrene foam-filled float with motor, diffuser, support tube, and junction box assembly with removable watertight power cord connection, motor starter in NEMA 3R enclosure with on/off switch, and 200 feet of 12/4 power cable (trim to the length you desire). Note: 1-year limited warranty void if cable is extended over maximum length supplied by manufacturer.
Sizing:
Pond configurations and conditions can vary greatly, affecting any aerator's performance. As a general guideline to turn your pond or lagoon over at least once a day, consider one acre = 43,560 square feet and there are 325,829 gallons in one acre per foot of depth. Select an aerator (one or more) that will move this amount of water per day. Multiple units may be desirable for more uniform mixing over a wide area. Aquarian standard aeration efficiency (SAE) is 3 lbs of oxygen per hp per hour.
- Pumping rate (GPM): 500
- Pumping rate (GPD): 720,000
- Amps: 12
Product Information
- Item number
- 42742
- Brand Name
- Air-O-Lator
- Catalog Page
- 39
- Net weight
- 67.2
- Condition
- New
Aquarian™ Professional Aerator, 0.5 hp/115V/1 PH, 100'L Power Cable
- Item number
- 42742
- Brand Name
- Air-O-Lator
- Catalog Page
- 39
- Net weight
- 67.2
- Condition
- New
- Standard Franklin 1- and 3-phase motors up to 3 hp
- Suitable for fresh water and saltwater applications
- Control boxes included
These aerators incorporate a 3450 rpm Franklin submersible motor that is water-cooled, water-lubricated and UL & CSA recognized. There are no seals or bearings to maintain. A foul-resistant propeller pumps the large water column to a computer-designed diffuser where a shearing effect occurs, breaking the column into micro droplets. This increases surface area exposed to atmosphere, maximizing oxygen exposure.
Aerators consist of a 36" square polyethylene-molded and polystyrene foam-filled float with motor, diffuser, support tube, and junction box assembly with removable watertight power cord connection, motor starter in NEMA 3R enclosure with on/off switch, and 200 feet of 12/4 power cable (trim to the length you desire). Note: 1-year limited warranty void if cable is extended over maximum length supplied by manufacturer.
Sizing:
Pond configurations and conditions can vary greatly, affecting any aerator's performance. As a general guideline to turn your pond or lagoon over at least once a day, consider one acre = 43,560 square feet and there are 325,829 gallons in one acre per foot of depth. Select an aerator (one or more) that will move this amount of water per day. Multiple units may be desirable for more uniform mixing over a wide area. Aquarian standard aeration efficiency (SAE) is 3 lbs of oxygen per hp per hour.
- Pumping rate (GPM): 500
- Pumping rate (GPD): 720,000
- Amps: 12