LMI Series C7 Pump w/ LiquiPro Head, 31.2 GPD, 300 PSI, C701-498SP
Description
- Stroke speeds up to 240 strokes per minute
- Accepts multiple external control options
- For use with general chemicals
These pumps feature two dials for simple, manual control of stroke speed and length. Stroke rate is also adjustable using an external pulse signal from a flowmeter or LMI controller. Remote on/off and low-level shutoff inputs lets you to shut off the pump automatically when there is no flow in the process stream or when your chemical day tank reaches low levels. Pumps feature a 1-1/2" NPT(M) tubing connection, plus a 1/2" NPT(M) connection for hard piping.
Use with 28% ammonium chloride, ammonium hydroxide, ammonium sulfate, calcium hypochlorite, ferric sulfate, hydrochloric acid, 90% hydrogen peroxide, magnesium hydroxide, 10% potassium permanganate, sodium bisulfate, 12.5% sodium hypochlorite and 98.5% sulfuric acid (call for compatibility with other chemicals).
Wetted materials: PVDF head, PVDF fittings, ceramic check balls, Fluorofilm diaphragm and PTFE seals.
Includes: injection valve, suction valve, 4-function valve, foot valve/strainer and 16' of polyethylene tubing.
Note: To control your pump using a pulse signal, a 4-pin control cable (stock # 60798) is required. To adjust the signal, order the multiplier (stock # 67776) for lower frequency pulses or the divider (stock # 67775) for higher frequency pulses. To control your pump using a 4-20 mA input, order the analog-to digital converter (stock # 61150).
Need repair parts for your pump? Use our quick-find selection tool now.
- Connection: 1-1/2" NPT(M)
- Maximum viscosity: 200 cP
- Accuracy: ±2%
- Input: wet contact closure for remote start/stop, low-level float switch input, and pulse (4-20 mA input possible when used with stock # 61150; sold separately)
- Power: 110/120 VAC with MICROPACE
Product Information
- Item number
- 350402
- Brand Name
- LMI
- Catalog Page
- 126
- Net weight
- 5
- Condition
- New
LMI Series C7 Pump w/ LiquiPro Head, 31.2 GPD, 300 PSI, C701-498SP
- Item number
- 350402
- Brand Name
- LMI
- Catalog Page
- 126
- Net weight
- 5
- Condition
- New
- Stroke speeds up to 240 strokes per minute
- Accepts multiple external control options
- For use with general chemicals
These pumps feature two dials for simple, manual control of stroke speed and length. Stroke rate is also adjustable using an external pulse signal from a flowmeter or LMI controller. Remote on/off and low-level shutoff inputs lets you to shut off the pump automatically when there is no flow in the process stream or when your chemical day tank reaches low levels. Pumps feature a 1-1/2" NPT(M) tubing connection, plus a 1/2" NPT(M) connection for hard piping.
Use with 28% ammonium chloride, ammonium hydroxide, ammonium sulfate, calcium hypochlorite, ferric sulfate, hydrochloric acid, 90% hydrogen peroxide, magnesium hydroxide, 10% potassium permanganate, sodium bisulfate, 12.5% sodium hypochlorite and 98.5% sulfuric acid (call for compatibility with other chemicals).
Wetted materials: PVDF head, PVDF fittings, ceramic check balls, Fluorofilm diaphragm and PTFE seals.
Includes: injection valve, suction valve, 4-function valve, foot valve/strainer and 16' of polyethylene tubing.
Note: To control your pump using a pulse signal, a 4-pin control cable (stock # 60798) is required. To adjust the signal, order the multiplier (stock # 67776) for lower frequency pulses or the divider (stock # 67775) for higher frequency pulses. To control your pump using a 4-20 mA input, order the analog-to digital converter (stock # 61150).
Need repair parts for your pump? Use our quick-find selection tool now.
- Connection: 1-1/2" NPT(M)
- Maximum viscosity: 200 cP
- Accuracy: ±2%
- Input: wet contact closure for remote start/stop, low-level float switch input, and pulse (4-20 mA input possible when used with stock # 61150; sold separately)
- Power: 110/120 VAC with MICROPACE