Locate the pump model number (found on the tag). A model number will look like this: AD941-920HI. The numbers after the dash are the wet end code. For example, the wet end code will look like this: 920HI. To select the correct replacement part in the large table below and to the right, find the wet end code from your pump in the first column. Then, find the USABlueBook stock number that corresponds to your replacement part. We show the most common wet ends; contact us if you cannot find yours.
If you don’t see your pump’s wet end code, or need assistance in selecting the correct repair part, we’re here to help. Just give us a call at 800-548-1234.
A Injection Valve Assembly:*Includes 1 each injector fitting, spring, check ball, seal ring and valve seat. 1/2" NPT threaded connection standard. Not shown in diagram
B Suction Valve Assembly:*Includes 1 each seal ring, valve seat, valve housing and up to 2 valve cartridges with check balls. 1/2" NPT threaded connection standard.
C Multifunction Valve: Offers four functions: Anti-Siphon Protection to prevent discharge line from siphoning fluid from the discharge tank, 20 psi Back Pressure on the discharge valve to improve performance, Pressure Relief via a second diaphragm that releases fluid to a relief port, and Pressure Release to depressurize the discharge line without loosening tubing or fittings. (Retrofit multifunction kits listed here include multifunction valve, tubing, additional fittings and O-rings for installation on both Roytronic and LiquiPro 300/400/800/900 Series wet ends).
D Liquid End Assembly: Includes 1 each head, suction/discharge valves, diaphragm, foot valve, injection valve and tubing. Not shown in diagram
E Head: Head only. No other parts included.
F Foot Valve Assembly:*Includes 1 each seal ring, valve seat, valve housing, cartridge with check ball and strainer. 1/2" NPT threaded connection standard. Not shown in diagram
G Diaphragm: Diaphragm only. No other parts included.
H Repair Kit:*Includes foot/suction/discharge/injection valve cartridges, cartridge seals/O-rings, diaphragm, head screws and shaft seal. 1/2" NPT threaded connection standard. Not shown in diagram
*Tubing Connection Kit sold separately.
Roytronic Repair Assemblies
Note: Click on your WET END # for complete liquid end specifications (exploded-view line art where available).