Proper pump maintenance is essential for optimized performance and extended life. We recommend keeping essential repair parts on hand for quick access and reduced downtime.
To find the repair part you need:
First use your pump’s model number (found on the tag) to identify its wet end code. You’ll find the wet end code after the dash (e.g., AD941-920HI). Then use the tables and diagrams to select the part that’s compatible with your pump’s specific wet end.
If you don’t see your pump’s wet end code, or need assistance in selecting the correct repair part, we’re here to help. Just give us a call at 800-548-1234.
A Injection Valve Assembly: Includes 1 each flapper valve, injector fitting, spring, check ball, seal ring, valve seat and coupling nut. Not shown in diagram
B Suction Valve Assembly: Includes 1 each cartridge check valve, valve housing, valve seat and coupling nut.
C Multifunction Valve: Offers four functions: Anti-Siphon Protection to prevent discharge line from siphoning fluid from the discharge tank, 20 psi Back Pressure on the discharge valve to improve performance, Pressure Relief via a second diaphragm that releases fluid to a relief port, and Pressure Release to depressurize the discharge line without loosening tubing or fittings. (Retrofit multifunction kits listed here include multifunction valve, tubing, additional fittings and O-rings for installation on both Roytronic and LiquiPro 300/400/800/900 Series wet ends).
D Liquid End Assembly: Includes 1 each head, suction/discharge valves, diaphragm, foot valve, injection valve and tubing. Not shown in diagram
E Head: Head only. No other parts included.
F Foot Valve Assembly: Includes 1 each cartridge check valve, valve seat and valve housing. Not shown in diagram
G Diaphragm: Diaphragm only. No other parts included.
H Repair Kit: Includes foot/suction/discharge/injection valve cartridges, cartridge seals/O-rings, diaphragm, head screws, tubing ferrules/clamp rings and shaft seal. Not shown in diagram
LiquiPro Repair Assemblies
Note: Click on your WET END # for complete liquid end specifications (exploded-view line art where available).