Roto-Float® Signal-Duty Float Switches w/ 20-ft Cable, SPST, Normally Open (NO), Suspended (Internal Weight)
Description
- Single pole single throw (SPST) model
The Roto-Float is an oval-shaped, direct-acting float switch. It contains a single pole mercury switch* that actuates when the float is slightly above horizontal and de-actuates when the liquid level falls below horizontal. The float body is polypropylene casing that is impact- and chemical-resistant.
Suspended units have a built-in counterweight. Cables are 18/2 STO, oil-resistant with a temperature range of -68 to 140°F. Cables on all of these switches have blunt ends for wiring into control circuits. This is ideal for a variety of applications including pump in/out, low level cutout and low/high level alarms.
Note: Use for signal/control duty only; not for direct pump operation. Pipe-mount units are not internally weighted.
*These items may be restricted from sale in certain states. Please check with your local governing body to ensure compliance with all laws and regulations.
- Type: signal/control-duty, narrow angle
- Electrical rating: 4.5A @ 120V, 2.25A @ 230V resistive
- Actuation angle: 1" above and 1" below horizontal
- Switch element: SPST, mercury*
- Float material: polypropylene, chemical-resistant
- Cable: oil-resistant, 18/2 AWG STOOW–600 VAC
- Dimensions: 4-1/4"Dia x 6"L
- Approvals: UL listed
- Switch type: NO
- Cable length: 20'
Product Information
- Item number
- 47732
- Brand Name
- Anchor Scientific
- Catalog Page
- 828
- Net weight
- 3.6
- Condition
- New
Alternate
Roto-Float® Signal-Duty Float Switches w/ 20-ft Cable, SPST, Normally Open (NO), Suspended (Internal Weight)
- Item number
- 47732
- Brand Name
- Anchor Scientific
- Catalog Page
- 828
- Net weight
- 3.6
- Condition
- New
- Single pole single throw (SPST) model
The Roto-Float is an oval-shaped, direct-acting float switch. It contains a single pole mercury switch* that actuates when the float is slightly above horizontal and de-actuates when the liquid level falls below horizontal. The float body is polypropylene casing that is impact- and chemical-resistant.
Suspended units have a built-in counterweight. Cables are 18/2 STO, oil-resistant with a temperature range of -68 to 140°F. Cables on all of these switches have blunt ends for wiring into control circuits. This is ideal for a variety of applications including pump in/out, low level cutout and low/high level alarms.
Note: Use for signal/control duty only; not for direct pump operation. Pipe-mount units are not internally weighted.
*These items may be restricted from sale in certain states. Please check with your local governing body to ensure compliance with all laws and regulations.
- Type: signal/control-duty, narrow angle
- Electrical rating: 4.5A @ 120V, 2.25A @ 230V resistive
- Actuation angle: 1" above and 1" below horizontal
- Switch element: SPST, mercury*
- Float material: polypropylene, chemical-resistant
- Cable: oil-resistant, 18/2 AWG STOOW–600 VAC
- Dimensions: 4-1/4"Dia x 6"L
- Approvals: UL listed
- Switch type: NO
- Cable length: 20'