Honeywell Analytics Sensepoint XCD LEL Detector, 20-100%
Description
The Honeywell Analytics Touchpoint Plus gas detector system is an easy-to-configure, wall-mounted control system. Intuitive user interface and modular approach let you control and configure settings for a wide range of applications. Use it with your choice of several Sensepoint gas detectors to monitor hazardous gases in critical locations. If you need to integrate your gas detection with a higher-level management system, the Modbus output option makes this straightforward.
Sensepoint detectors are easy to use—they are supplied preset from the factory, and there are no user-serviceable parts. All detector adjustments are made at the Touchpoint Plus controller. At the end of the sensor's operating life, simply unscrew the sensor and replace it with a new one before reconfiguring the controller.
Detectors feature two programmable alarm relays, one programmable fault relay, an industry-standard 4-20 mA output (sink or source selectable) and Modbus. Installation is simple using the prewired junction box, conduit or armored cable, and glands. Threaded M20, 3/4 and 1/2" NPT clearance entries are included on each box, so you can select the most convenient entry to use.
Use Sensepoint XCD detectors to monitor areas where flammable or toxic gases and oxygen deficiency may pose a hazard to working environments. They offer a tri-color backlit display to show system status at a glance.
- Measuring Range: 20-100%
- Power: 12 to 32 VDC (24 VDC Nominal)
- Operating conditions: –40 to 149°F
- Dimensions: 6.5"W x 8.9"H x 3.9"D
- Audible alarm: 70dB at 1 meter
Product Information
- Item number
- 330825
- Brand Name
- Honeywell Analytics Dist. Inc.
- Catalog Page
- 1319
- Net weight
- 4.8
- Condition
- New
Honeywell Analytics Sensepoint XCD LEL Detector, 20-100%
- Item number
- 330825
- Brand Name
- Honeywell Analytics Dist. Inc.
- Catalog Page
- 1319
- Net weight
- 4.8
- Condition
- New
The Honeywell Analytics Touchpoint Plus gas detector system is an easy-to-configure, wall-mounted control system. Intuitive user interface and modular approach let you control and configure settings for a wide range of applications. Use it with your choice of several Sensepoint gas detectors to monitor hazardous gases in critical locations. If you need to integrate your gas detection with a higher-level management system, the Modbus output option makes this straightforward.
Sensepoint detectors are easy to use—they are supplied preset from the factory, and there are no user-serviceable parts. All detector adjustments are made at the Touchpoint Plus controller. At the end of the sensor's operating life, simply unscrew the sensor and replace it with a new one before reconfiguring the controller.
Detectors feature two programmable alarm relays, one programmable fault relay, an industry-standard 4-20 mA output (sink or source selectable) and Modbus. Installation is simple using the prewired junction box, conduit or armored cable, and glands. Threaded M20, 3/4 and 1/2" NPT clearance entries are included on each box, so you can select the most convenient entry to use.
Use Sensepoint XCD detectors to monitor areas where flammable or toxic gases and oxygen deficiency may pose a hazard to working environments. They offer a tri-color backlit display to show system status at a glance.
- Measuring Range: 20-100%
- Power: 12 to 32 VDC (24 VDC Nominal)
- Operating conditions: –40 to 149°F
- Dimensions: 6.5"W x 8.9"H x 3.9"D
- Audible alarm: 70dB at 1 meter